Skip to main content

Windows 8 - Safe mode

Safe Mode is a great way to get into your system when something won't allow you to start up normally. Troubleshooting becomes a breeze when corrupted drivers and files aren't loaded that prevents a system from functioning. It used to be as easy as pressing F8 when the system starts up, but doing so with Windows 8 will take you to Automatic Repair Mode. The trick to getting back to good old fashioned Safe Mode? Hold down the Shift key and press F8 while booting up.

This takes you to the Recovery mode. Select "advanced options," then "troubleshoot," then the "advanced options" again (there are a lot of advanced options). Select Windows Startup Settings and finally the Restart button. This will reboot the computer and give you the option to boot into Safe Mode.

If you need to get into Safe Mode from within Windows, open the dialog box (the Windows key + R) and type "msconfig" (no quote marks). Select the Boot tab and check the Safe boot box. The system will continually boot into Safe Mode until you go back and uncheck the box.

Comments

Popular posts from this blog

Ubuntu: Access a usb flash drive from the terminal

    1. Find what the drive is called You'll need to know what the drive is called to mount it. To do that fire off: sudo fdisk -l You're looking for a partition that should look something like:   /dev/sdb1 . Remember what it's called. 2. Create a mount point Create a new directory in   /media   so you can mount the drive onto the filesystem: sudo mkdir /media/usb 3. Mount! sudo mount /dev/sdb1 /media/usb When you're done, just fire off: sudo umount /media/usb Source: StackOverflow

Karabiner: Mouse/keyboard customizer for OS X

For beginners, or the one who migrated from Windows environment, Natural Gestures (Scrolling and Swiping) might be bit confusing. But, once you get familiarized with them, it may feel like "What was I doing, all those days?". It all changed, when I connected external mouse to my Macbook. When you start using that WHEEL, you will be confused. Luckily there is a setting for mouse, to change scroll behavior (natural or the other way). But, here's the catch. If you toggle that setting, it also toggles the same for TRACKPAD!!!!! I've seen that many people were freaked out and even raised BUG report to Apple. But, all those reports were closed, saying that is not a bug, but intentional feature!!! For those, who can't leave with such one-sided settings, here is a simple util, which came to my rescue: Karabiner It's simple, powerful and stable mouse/keyboard customizer for OSX. Without going into much detail, here's the configuration I used to ret

Java: Use BigInteger in for-loop

In my previous post , I mentioned a way to handle large integers by using BigInteger. Now I'm going to provide a very important usage of it. We often use for-loop. So here is the way to use it: Ordinary integers: for(int i = 1; i <= n; i++) {  //Task to do } BigInteger: for (BigInteger bi = BigInteger.valueOf(1);                 bi.compareTo(n) <= 0;                 bi = bi.add(BigInteger.ONE)) { //Task to do } here n is a BigInteger variable.